Updating the SCI Software You can update your SCI software either from the cloud or by downloading the updated software package. Updating the Software from the Cloud You can update the SCI software from the cloud if you are connected to the internet (recommended). Follow these steps to update the software from the cloud: Note: Because the cloud updater downloads images from Amazon AWS, ensure that the following domains are whitelisted from the SCI VM for both incoming and outgoing traffic: s3-us-west-2.amazonaws.com 484213038011.dkr.ecr.us-west-2.amazonaws.com From the SCI dashboard, click Admin > Status & Update. The Status & Update page appears. Click Check for Updates. Figure 1. Updating software It takes up to 10 minutes to update the software package. Updating the Software Package by Downloading it You can also update the SCI software by downloading the updated software package if you are not connected to the internet. Follow these steps to update the software by downloading the software package: Download the updated software package from the Ruckus Wireless support web site. Upload the software package to the Master Node location: /storage/updates directory. From the Master node, run the following command: where software_update_package_file_name is the name of the updated software package file (without the parent directories) uploaded in the previous step. It takes up to 10 minutes to exclusively update the software package (not counting the time to upload or download the software).